Filter
Top Products
Message Description Action
40 EIO X BAD
TRANSMISSION
alternates with
To continue press
HP 3700 only when an EIO device
is installed.
A connection with the card in the
EIO slot has been abnormally
broken.
Press to continue printing.
NOTE
A loss of data will occur.
41.3 UNEXPECTED
SIZE IN TRAY X
alternates with
LOAD TRAY X
<TYPE> <SIZE>
Paper is loaded that is longer or
shorter in the feed direction than the
size configured for the tray.
1. Load the paper as instructed.
2. Press
to print.
3. If the incorrect size was selected,
press S
TOP
to cancel the job or press
for help.
4. If the incorrect tray was selected, press
S
TOP
to cancel the job.
5. Configure the trays correctly and
resend the job.
Ensure all trays are configured correctly.
41.5 UNEXPECTED
TYPE IN TRAY X
alternates with
LOAD TRAY X
<TYPE> <SIZE>
The printer senses a different paper
type in the paper path than what is
configured in the tray.
1. Load the paper as instructed.
2. Press
to print.
3. If the incorrect type was selected,
press S
TOP
to cancel the job or press
for help.
4. Configure the trays correctly and
resend the job.
Ensure all trays are configured correctly.
Table 7-3. Numerical printer messages (continued)
334 Chapter 7 Troubleshooting ENWW