Filter
Top Products
Message Description Action
Processing...
INTERMITTENT MODE
alternates with
For help press
The printer has experienced a period of
heavy use. To maintain a supported
operating temperature, the printer will
print and pause in one-minute intervals.
No action necessary.
To avoid intermittent mode in the future,
reduce the amount of heavy use.
Processing...
<JOB NAME>
The printer is currently processing a job
but is not yet picking pages. When paper
motion begins, this message will be
replaced by a message that indicates
which tray the job is being printed from.
No action necessary.
Processing...
<JOB NAME>
alternates with
from tray X
The printer is actively processing a job
from the designated tray.
No action necessary.
RAM DISK DEVICE
FAILURE
alternates with
Ready
To clear press
HP 3700 only.
A device failure has occurred on the
specified storage device.
1. Printing may continue for jobs that do
not require the RAM disk.
2. To remove this message from the
display, press
.
RAM DISK X
Initializing
alternates with
DO NOT POWER OFF
HP 3700 only.
The new RAM disk installed in slot X is
initializing.
No action necessary.
RAM DISK FILE
OPERATION FAILED
alternates with
Ready
To clear press
HP 3700 only.
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to
download a file to a non-existent
directory).
1. Printing may continue.
2. To remove this message from the
display, press
.
3. If the message reappears, there might
be a problem with the software
application.
RAM DISK FILE
SYSTEM IS FULL
alternates with
Ready
To clear press
HP 3700 only.
The printer received a PJL file system
command that attempted to store
something on the file system but was
unsuccessful because the file system is
full.
1. Use HP Web Jetadmin software to
delete files from the RAM disk
memory and try again.
2. To remove this message from the
display, press
.
See
HP Web Jetadmin (in chapter 3) for
more information.
RAM DISK IS
WRITE PROTECTED
alternates with
Ready
To clear press
HP 3700 only.
The file system is protected and no new
files can be written to it.
1. To enable writing to the RAM disk
memory, turn off write protection using
HP Web Jetadmin.
2. To remove this message from the
display, press
.
See
HP Web Jetadmin (in chapter 3) for
more information.
Table 7-2. Alphabetical printer messages (continued)
322 Chapter 7 Troubleshooting ENWW