Filter
Top Products
After the print job completes, press S
TOP
to return to the diagnostic menu before the timer
times out.
After the timer times out, press S
TOP
. You will have to cycle the door switch by opening and
closing the front door to restart the engine and return it to a normal state. When the timer
trips, the display shows the message PRINTING STOPPED, PRESS Check TO
CONTINUE. Pressing
will print the previously selected job. If you do not want the previous
job to print, press S
TOP
first, and then press the button.
NOTE
Do not attempt to execute a Print/Stop test while the printer is calibrating; a power cycle will
be required. If you encounter a jam message during testing, cycle the door switch.
Information menu
From the information menu, the following pages can be printed.
Print Menu Map. prints the control panel menu map, which shows the layout and current
settings of the control panel menu items.
Print Configuration used to help troubleshoot printer problems or to verify installation of
optional accessories such as memory (DIMMs), paper trays, and printer languages.
Print Supplies Status Page prints a page that indicates remaining life of supplies.
Supplies Status displays on the control panel the remaining life of supplies.
Print Usage Page HP 3700 only. Indicates page count for each tray and the size and type
of media printed.
Print Demo used to test print quality by printing a demo page.
Print File Directory HP 3700 only. Prints the name and directory of files stored in the printer
such as a RAM disk.
Print PCL Font test page HP 3700 only. Prints available PCL fonts.
Print PS Font List HP 3700 only. Prints the available PS (emulated PostScript) fonts.
Configure device menu/printing menu
Print PS Errors HP 3700 only. Allows you to print the PS error pages.
Configure device menu/resets menu
Restore Factory Settings allows you to clear the page buffer, remove all perishable
personality data, reset the printing environment, and return all default settings to factory
defaults.
Reset Supplies New Transfer Kit or New Fuser Kit – Allows you to inform the printer that a
new transfer kit or new fuser kit has been installed which will reset the page count of that
supply to zero.
Configure device menu/print quality menu
Calibrate Now used to calibrate the printer to maintain optimum print quality. It executes all
printer calibrations: DMAX, DHALF, color plane registration, and drum phase adjustment.
Adjust Color, Print Modes, and OptimizeThese can be used to optimize print quality.
ENWW Diagnostics from the Control Panel 443