10. Lower the duplex guide pan (1) until it is perpendicular with the base of the printer and
pull it straight out (2) to remove it.
Reinstallation tip
Ensure that the grounding spring (3) on the left side is connected to the contact (4).
Figure 6-139.
Right Tray 2 guide removal (4 of 6)
11. Remove two screws (1) from the duplex position guide assembly (2) and remove it.
Figure 6-140.
Right Tray 2 guide removal (5 of 6)
ENWW Tray 2 (cassette) parts removal 293