Tray 1 pick-up roller removal
1. Remove the transfer unit. See Transfer unit removal.
2. Unhook one claw (1) and slide the idler roller (2) in the direction of the arrow.
3. Rotate the Tray 1 pick-up roller (3) upwards to release it from the shaft and lift the roller
out.
Figure 6-44.
Tray 1 pick-up roller removal
NOTE
Replace the separation pad whenever you replace the pick-up roller.
.
Tray 1 separation pad removal
1. Remove the Tray 1 pick-up roller. See Tray 1 pick-up roller removal, above.
2. Slide the left idler roller (1) in the direction of the arrow (2).
3. Place a flat-blade screwdriver under each slot (3) and twist the screwdriver to pry the
pad loose to remove it.
Figure 6-45.
Tray 1 separation pad removal
NOTE
Replace the pick-up roller whenever you replace the separation pad.
ENWW Main assembly parts 237