Filter
Top Products
Message Description Action
Loading
program X
alternates with
DO NOT POWER OFF
HP 3700 only.
Programs and fonts can be stored on the
printer file system and are loaded into
RAM when the printer is turned on. The
number X specifies a sequence number
indicating the current program being
loaded.
No action necessary.
MANUALLY FEED
OUTPUT STACK
alternates with
Then press
to
print second sides
The first side of a manual 2-sided print
job has been printed and the printer is
waiting for the output stack to be
inserted for the second side to be printed.
Take the output stack out of the output bin
and reinsert it in Tray 1 to print the second
side of the 2-sided print job.
If no paper is in the manual feed
tray:
MANUALLY FEED
<TYPE> <SIZE>
alternates with
To continue press
A job sent requires a specific paper type
and size that is not currently available.
Press to print from the tray.
or
Press
for help.
MANUALLY FEED
<TYPE> <SIZE>
alternates with
For help press
Tray 1 is empty and no other tray is
available. MANUAL FEED was set to ON
in the control panel.
Press for help.
Turn MANUAL FEED off in the control
panel.
MANUALLY FEED
<TYPE> <SIZE>
alternates with
To use another
tray press
.
There is no paper in the tray and a print
job sent requires a specific paper type
and size that is not currently available
through Tray 1.
Press to print from another tray.
or
Press
for help.
Moving solenoid
alternates with
To exit press
STOP key
The printer is executing a Component
Test and the component selected is
Solenoid.
No action necessary.
Moving solenoid
and motor
alternates with
To exit press
STOP key
The printer is executing a Component
Test and the components selected are
Solenoid and Motor.
No action necessary.
Table 7-2. Alphabetical printer messages (continued)
318 Chapter 7 Troubleshooting ENWW