Filter
Top Products
Message Description Action
54.XX PRINTER
ERROR continued
33.0X Scanner Beam Detect
adjustment abnormality warning X is
the scanner number:
1 = yellow/magenta scanner
2 = cyan/black scanner
54.15
54.16
54.17
54.18
54.20
Color misregistration sensor abnormality
1. The connectors between the color
misregistration sensor (CPR) and the DC
controller PCB are not connected properly.
Reseat the color misregistration sensor
(CPR) connectors (J505A, J505B) and the
DC controller PCB connector J1012.
2. Faulty color misregistration sensor
(CPR). Replace the color misregistration
sensor (CPR).
3. Faulty DC controller PCB. Replace the
DC controller PCB.
54.21 -
54.22 -
54.23 -
54.24 -
Toner (Y/M/C/K) level sensor abnormality
1. The connectors in the toner level sensor
control line are not connected properly.
Reseat the memory controller PCB
connector J201 and the DC controller PCB
connector J1025.
2. Faulty memory controller PCB. Replace
the memory controller PCB.
3. Faulty DC controller PCB. Replace the
DC controller PCB.
54.30.XX (event log only) HP3700
only
Halftone calibration error.
XX Description:
06 - magenta data out of range.
07 - yellow data out of range.
08 - black data out of range.
09 - cyan data out of range.
54.30.XX
Perform a CALIBRATE NOW in the
CONFIGURE DEVICE / PRINT QUALITY
menu on the printer control panel.
Table 7-3. Numerical printer messages (continued)
ENWW Printer error troubleshooting 343