Filter
Top Products
Site requirements
The printer must be kept in a proper location to maintain the performance level that has
been set at the factory. In particular, be sure that the environment adheres to the
specifications listed in this chapter.
Below are recommendations for the printer location and placement.
Make sure the printer has the following:
● a well-ventilated, dust-free area
● a hard, level surface (not more than a 2° angle) that can support approximately 43.4 kg
(95.5 lbs)
● a level surface that supports all four corners of the 500-sheet paper feeder
● constant temperature and humidity. (Do not install near water sources, humidifiers, air
conditioners, refrigerators, or other major appliances.)
Make sure to keep the printer away from the following:
● direct sunlight, dust, open flames, or water
●
direct flow of exhaust from air ventilation systems
● magnets and devices that emit a magnetic field
● areas subject to vibration
● walls or other objects (There must be enough space around the printer for proper access
and ventilation. See the figures
Figure 1-9. Space requirements for the HP Color
LaserJet 3500/3550 series printer and Figure 1-10. Space requirements for the HP Color
LaserJet 3700 series printer with optional Tray 3, on the following pages.)
Space requirements
The printer must have the following amounts of space above and around it.
Figure 1-9.
Space requirements for the HP Color LaserJet 3500/3550 series printer
1 Height: 722 mm (28.4 in.)
2 Depth: 1480 mm (58.3 in.)
3 Width: 699.5 mm (27.6 in.)
ENWW Site requirements 11