Filter
Top Products
Menu item Value Description
TRAY 1 TYPE A list of available
types appears.
Allows you to configure the
media type for Tray 1. The
default value is ANY SIZE.
See
Supported media
weights and sizes for a
complete list of available
types.
TRAY 2 SIZE
TRAY 3 SIZE
A list of available
sizes appears.
Allows you to configure the
paper size for Tray 2 or
Tray 3. The default size is
Letter or A4 depending on
the country/region. See
Supported media weights
and sizes for a complete list
of available sizes.
TRAY 2 TYPE
TRAY 3 TYPE
A list of available
types appears.
Allows you to configure the
paper type for Tray 2 or
Tray 3. The default is
PLAIN. See
Supported
media weights and sizes for
a complete list of available
types.
Configure device menu
The configure device menu allows you to change or reset the default print settings, to adjust
the print quality, and to change the system configuration and I/O options.
Printing menu
These settings affect only jobs without identified properties. Most jobs identify all of the
properties and override the values set from this menu. This menu can also be used to set
default paper size and type.
Table 7-43. Printing menu
Menu item Values Description
COPIES 1 - 32000 Allows you to set the default
number of copies. The
default number of copies is 1.
DEFAULT PAPER SIZE A list of
available sizes
appears.
Allows you to set the default
paper size.
DEFAULT CUSTOM PAPER SIZE UNIT OF
MEASURE
X DIMENSION
Y DIMENSION
Allows you to set the default
size for any custom job
without dimensions.
Available for Tray 1.
Table 7-42. Paper handling menu (continued)
ENWW Control panel troubleshooting 409