11. Remove the swing guide by pulling it to the right, being careful not to force it. The guide
must be positioned all the way forward to release the catch on the shaft, which will allow
the swing guide to be removed.
Reinstallation tip
Make sure the projected part at the bottom of the swing guide is placed into the guide rail.
Reinstallation tip
Make sure the developing (drum) lock arms (1) are in the upright, latched (2) position (as
shown in the figure below), before reinstalling the swing guide. If these arms are in the
unlocked position, they will prevent the swing guide from moving back. Also, while
pushing the swing guide back, these arms will occasionally unlatch, preventing the guide
from being moved back. If that occurs, reach behind the swing guide and relatch the lock
arms.
Figure 6-65.
Left swing guide replacement
ENWW Main assembly parts 249