Filter
Top Products
Menu item Values Description
OPTIMIZEcontinued FILM OFFSET - Use when
fuser electrostatic offset
occurs (like fuser hot offset
but is caused by an
electrostatic charge on the
fuser film).
GHOST PREVENTION - Use
when positive ghost appears.
PRE-ROTATION - Use when
a repetitive horizontal line
occurs every 77 mm due to a
print cartridge drum
stoppage; or, use to reduce
non-uniform color areas in
overhead transparencies.
RESTORE OPTIMIZE -
Restores default values
CALIBRATE NOW n/a Performs all printer
calibrations to optimize print
quality.
CREATE CLEANING PAGE n/a Prints a cleaning page to be
used for cleaning the fuser
roller. This page contains
instructions for processing
the cleaning page. See
Cleaning the printer and
accessories for more
information.
PROCESS CLEANING PAGE n/a After the cleaning page is
loaded in Tray 1, this menu
item allows the printer to
process the cleaning page.
The cleaning process takes a
few moments. See
Cleaning
the printer and accessories
for more information.
System setup menu
The system setup menu allows you to make changes to default settings for general printer
configuration, such as PowerSave Time, printer personality (language), and jam recovery.
Table 7-44. Print quality menu (continued)
414 Chapter 7 Troubleshooting ENWW