1. Lift the latch (1) on the printer front door and open the door (2).
Figure 7-2.
Printer front door
CAUTION
Do not place anything on the surface of the transfer unit.
Also, do not touch the transfer unit contacts located on the left side of the unit.
2. Remove the transfer unit (1) by grabbing the blue handles (2) on both sides of the
transfer unit. With your right thumb press and hold the lever (3) on the right side handle
then lift the handle up (4), followed by lifting the left side (5). Set the unit aside on a flat
surface. Be careful not to touch the black upper surface (transfer belt) of the unit.
364 Chapter 7 Troubleshooting ENWW