Filter
Top Products
Message Description Action
ORDER FUSER KIT
alternates with
LESS THAN X PAGES
alternates with
Ready
For help press
The fuser is near end of life. The printer
is ready and will continue for the
estimated number of pages indicated.
Order the fuser kit. Printing can continue
until REPLACE FUSER KIT is shown.
or
Press
for help.
See
Ordering parts (in chapter 8) for more
information.
Order Supplies
alternates with
Ready
More than one supply item is low. 1. Press to identify which supplies
should be ordered or print a supplies
status page.
2. Order the identified supplies. Printing
can continue until REPLACE
SUPPLIES is reached.
or
Press
for help.
3. See
Ordering parts (in chapter 8) for
more information.
ORDER TRANSFER KIT
alternates with
LESS THAN X PAGES
alternates with
Ready
For help press
The number of pages remaining for the
transfer unit has reached the low
threshold, and the SUPPLIES LOW
setting in SYSTEM SETUP is set to
STOP.
Order the transfer kit. Printing can continue
until REPLACE TRANSFER KIT is reached.
Press
for help.
See
Ordering parts (in chapter 8) for more
information.
Paused
alternates with
To return to Ready
press the STOP key
The printer has paused. Press the Stop key to resume printing.
Performing...
PAPER PATH TEST
The printer is performing a Paper Path
Test.
No action necessary.
Performing
upgrade
A firmware upgrade is in process. No action necessary.
Do not turn off the printer.
Please wait The printer is in the process of clearing
data.
No action necessary.
Powersave on The printer is in the PowerSave mode.
Any button pressed or the receipt of data
will clear PowerSave and execute the
action.
Press any control panel button or the
receipt of data will clear PowerSave.
Printing...
CONFIGURATION
The printer is generating the
configuration page. The printer will return
to the online Ready state when the page
is completed. No action necessary.
No action necessary.
Table 7-2. Alphabetical printer messages (continued)
320 Chapter 7 Troubleshooting ENWW