Filter
Top Products
Message Description Action
Request accepted
please wait
The printer has accepted a request to
print an internal page, but the current job
must finish printing before the internal
page will print.
No action necessary.
Resend
upgrade
The firmware upgrade was not
completed successfully.
Attempt upgrade again. For the HP 3700
printer, you might need to use the parallel
port to send the upgrade file.
Restoring
factory settings
The printer is restoring factory settings. No action necessary.
Restoring... The printer is restoring settings. No action necessary.
Resetting Kit Count YES was selected in the RESET
SUPPLIES menu to reset the counts for
any of the supplies that cannot be
detected as new.
No action necessary.
Rotating <COLOR>
motor
alternates with
To exit press
STOP key
A component test is in progress; the
component selected is <color>
Cartridge motor.
Press Stop when ready to stop this test.
Rotating motor
alternates with
To exit press
STOP key
The printer is executing a Component.
Test and the component selected is
motor
Press S
TOP
when ready to stop this test.
Setting saved A menu selection has been saved. No action necessary.
TRAY X
<TYPE> <SIZE>
alternates with
To change size or
type press
The printer is reporting the current
configuration of tray X.
Press to change size or type.
Table 7-2. Alphabetical printer messages (continued)
ENWW Printer error troubleshooting 325