Filter
Top Products
8-18 SmartSwitch 1800 4.0 User Guide, Rev 01
Valid values (in bits per second) are:
75 150 300 600 1200 2400
4800 9600 19.2K 48K 64K
Default Calling Address
will be inserted into an incoming Call Request packet if the packet does not contain a
calling address.
T20 Restart Timer
will be started when the logical DTE issues a Restart Request, and stopped (and reset)
when a Restart Confirmation or Restart Indication is received. If the timer expires, the
DTE should retransmit the Restart Request.
T21 Incoming Call Timer
will be started when the logical DTE issues a Call Request packet, and stopped (and
reset) when a Call Connected, Clear Indication, or Incoming Call is received. If the
timer expires, the DTE should send a Clear Request.
T22 Reset Timer
will be started when the logical DTE issues a Reset Request, and stopped (and reset)
when a Reset Confirmation or Reset Indication is received. If the timer expires, the
DTE should retransmit the Reset Request or a Clear Request.
T23 Clear Timer
will be started when the logical DTE issues a Clear Request, and stopped (and reset)
when a Clear Confirmation or Clear Indication is received. If the timer expires, the
DTE should retransmit the Clear Request.
DTE Restart Retry Count
is the number of times a Restart Request from the logical DTE will be transmitted.
(The DTE will stop issuing the request on receipt of a Restart Confirmation or Restart
Indication.) If the
Restart Retry Count
expires, restart and recovery procedures should
be initiated.
DTE Reset Retry Count
is the number of times a Reset Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Reset Confirmation, Reset Indication,
or Clear Request.) If the
Reset Retry Count
expires, restart and recovery procedures
should be initiated.
DTE Clear Retry Count
is the number of times a Clear Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Clear Confirmation or Clear Indi-
cat ion.) If the
Clear Retry Count
expires, restart and recovery procedures should be ini-
tiated.