Cabletron Systems 1800 Switch User Manual


 
18-2 SmartSwitch 1800 4.0 User Guide, Rev 01
Figure 18-1 Main Menu
Menu items under entry A are described in Chapter 3. The following shows where to
find the remaining operations among the menus. The chapters where items are
described are shown in parentheses. Any item not followed by a chapter/appendix
number is described in the chapter/appendix shown following the next higher level.
B Operations
A On-Line Node Operations
(Chapter 19)
A Remote Control
– allows control of a remote Cabletron frame relay access
device.
B Remote File Transfer
– transfers files between nodes.
C Remote Software Update
– updates a remote node to a new release of
SmartSwitch 1800 software.
D Local File Backup
– copies a file to a PC (running Procomm Plus®)
connected to the SmartSwitch 1800's Console port.
E Set ZMODEM Path
– configures a path that will be used by
Local File Restore
(see next entry) for copying files to a SmartSwitch 1800.
F Local File Restore
– copies a file to the SmartSwitch 1800 from the PC
running Procomm Plus) connected to the Console port.
G Copy Backup directory to ZMODEM PC
– copies an entire database (that was
backed up using On-Line Database Operations) to a PC (running Procomm
Plus) connected to the SmartSwitch 1800's Console port.
H Copy Backup directory from ZMODEM PC
– copies the database transferred in
item G above back to the SmartSwitch 1800.
B On-Line Port Operations
(Chapter 19)
A Disable a Port
– Takes any physical or logical serial port in the node off line.
B Disable a Range of Ports
– Takes a specified group of same-type ports off
line.
C Enable a Port
– Brings any physical or logical serial port in the node on line.
D Enable a Range of Ports
– Brings a specified group of same-type ports on
line.
E Quiesce a Port
– Causes any physical or logical serial port in the node to be
taken off line when there are no active connections.
F Quiesce a Range of Ports
– Quiesces a specified group of same-type ports.
Node Name=node_xyz
M A I N M E N U
A Configuration
B Operation
C Status Displays
D Events
E Statistics
F Reports
Option::