Cabletron Systems 1800 Switch User Manual


 
Chapter 20
Status Displays
Displaying Node Status
Press
[A]
at the Status Displays Menu to display the overall performance of this node,
as well as most of the data shown on the Port Status Display. (See page 20-2.)
Figure 20-1 Node Status Display
[C],[A]
from Main Menu
Information in this Display:
Total Packets/Sec
– is the sum of current packets per second through all physical
ports in this node, divided by two. (This is also reflected by the bar graph on the
screen.)
Total Connections
– is the number of virtual connections (SVCs and PVCs) cur-
rently in use in this node, divided by two.
Boot Time
– is the date/time the SmartSwitch 1800 software was last started.
Status
– lists the possible operational states that each port can be in. See "State"
under "Displaying Port Status" on page 20-2.
# of Ports
– is the total number of (physical and logical) ports in the node with
the associated status.
Node Name=node_xyz
Node Status Display
Pkt/Sec ^-----------^----------^-----------^----------^-----------^----------^-----------^-----------^
0 128 256 384 512 640 768 896 1024
Performance Summary:
Total Packets/Sec: 1024
Total Connections: 26
Boot Time: 1/15/98 13:26:32
Link State Summary:
Status
# of Ports Status # of Ports
Operational 6 Linkup 1
Disconnect 1 Restart 0
Disable 0 Failed 0
Dial Ready 0 Qu iesced 0
Voice Loading 0 Voice Failed 0
Cal Ready 2 Call Active 0
F2:Remote Refresh, F9:Stop Remote, F10:A bort, Others:Exit