Filter
Top Products
9-26 SmartSwitch 1800 4.0 User Guide, Rev 01
Configuring LLC2 Interfaces
LLC2 Interfaces records define the types and locations of the interfaces that will carry
LLC2 traffic to or from a SmartSwitch 1800.
To display configured interfaces, press
[C]
at the IP/LLC2/BRIDGE.IPX Interfaces
Configuration Menu.
Figure 9-9 LLC2 Interfaces Display
[A],[C],[E],[C]
from Main Menu
These interfaces can be used for either LLC2 or Bridging. Also note that
the
RLP
column is irrelevant on the SmartSwitch 1800.
To configure an interface, press
[D]
at the LAN Interfaces Configuration Menu. When
prompted for an interface number (which is merely a sequential number to identify the
interface):
●
If modifying an existing record, enter the interface number:
0–95
.
●
If creating a new record, press
[Enter]
, which will automatically specify the next
available sequential interface number.
The display depends on the interface type. Examples are shown in the following two
figures.
Node Name=nodexyz
Review Bridge Ports/LLC-2 Interfaces
----------------------------------------------------------------------------------------------------------------------
Interface NumberTypeRLP Port DLCI Format
-----------------------------------------------------------------------------------------------------------------------
1 Ethern et
2 Frame Relay 0 1 30 Native LLC -2
3 Frame Relay 0 1 31 8025_SRB
4 Frame Relay 0 1 32 8025_SRB
5 Frame Relay 0 1 33 8023_TB
PgUp, PgDn, F3:Exit, F9:Stop Remote, F10:Abort