Filter
Top Products
2-10 SmartSwitch 1800 4.0 User Guide, Rev 01
Stopping Operation
Logging Out
If you have been working within menu operations and wish to log out, press
[F4]
at the
Main Menu. The Port Status Display screen will be displayed, with any updates. The
software will continue to run, but only those who know the password will be able to
gain access to the menus. You must press
[F1]
and enter the password to get back into
the Main Menu.
Rebooting
To reboot from within the menu level, press
[F10]
. When asked:
Reboot?
, press
[Y]
.
You cannot reboot the device from the initial Port Status Display. You must
first press
[F1]
and enter the password to get to the Main Menu.
Rebooting the node clears all connections. If you do not want to
do this, simply press
[F4]
to log out, then leave the device running.
Shutting Down
To shut down a SmartSwitch 1800, unplug it from its power source.
Make sure all users of the device are aware that it will be shut
down.
What Next?
Once you are familiar with the menus and how they work, proceed to Section II to con-
figure the database.