Cabletron Systems 1800 Switch User Manual


 
11-10 SmartSwitch 1800 4.0 User Guide, Rev 01
Redirect on Busy
will redirect calls (if
Y
) according to the Redirection Addresses if the primary sub-
scriber device is busy.
Redirect on Out of Order
will redirects calls (if
Y
) according to the Redirection Addresses if the primary sub-
scriber device is out of order.
Connection Priority
prioritizes intra-nodal traffic; the higher the number, the higher the priority. (This pri-
ority has no effect on traffic exiting a node.)
Priorities are configured on all logical interfaces that use a physical frame relay port.
The device processor in the node uses these priorities to help determine the order in
which it will process protocols.
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the node.
1st, 2nd,etc. Path Configured
includes or excludes the associated port as a routing path to the subscriber device. At
least one path must be specified.
Port
identifies the port(s) that make up the routing path(s).
Redirection Address 0,1,etc.
are up to five subscribers that will be called according to the specified redirection
option.