Filter
Top Products
21-18 SmartSwitch 1800 4.0 User Guide, Rev 01
IP Interface Statistics
IP Interface statistics track IP traffic over the node interface. Press
[E]
at the Statistics
Menu and, when prompted, enter:
●
Interface Number
:
0–128
.
●
Report Interval
:
5–65535
. (Default is
5
.)
The display will be similar to the following figure, with
IP/LAN
or
IP/W AN
at the upper
left identifying the interface type.
Figure 21-13 IP Interface Statistics Display
[E ], [E ]
from Main Menu
CURR
is the current value, and
CUMULATIVE
is the total since the last IPL
of the node.
Information in this Display:
●
Packets In/Out
– is the number of packets received/transmitted over the
interface.
●
Bytes In/Out
– is the number of bytes received/transmitted over the interface.
●
Multi-Cast In/Out
– is the number of packets received/transmitted via a multicast
address over the interface.
●
Errors In
– is the number of errors received over the interface.
●
Errors Out
– is the number of errors transmitted over the interface.
●
Q Dropped In
– is the number of incoming Q-packets that were dropped.
●
Unknwn Protocol
– is the number of frames that were not accepted because they
contained an unknown protocol.
●
Collisions
– is the number of transmitted frames that were involved in collisions.
Node Name=n ode_xyz
IP Interface Statistics Dis play
Report Interval (sec): 5 Current Time: 02/05/98 10:32:45
Interface Number: 2 Type: FRL MTU: 4096
STATISTIC CURR CUMULATIVE STATISTIC CURR CUMULATIVE
Packets In 21 269134 Pack ets Out 21 269420
Bytes In 8161 139690157 Bytes Out 8161 139822450
Multi-Cast In 0 0 Multi-CastOut 0 0
Errors In 0 0 Errors Out 0 0
Q Dropped In 0 0 Unkwn Protocol 0 0
Collisions 0 0
F4:Clear Cumulative Statistics, Others:Exit