Filter
Top Products
Configuring Voice 13-17
Figure 13-7 Voice Interface Configuration Menu
[A],[F],[F]
from Main Menu
Voice Interface Parameters
The parameters that can be configured are listed in the following table. Explanations
follow the table.
1
Not used if the peer node is a SmartSwitch 1800.
Interface Peer Node Type
specifies whether the node at the remote end of the frame relay connection is a Smart-
Switch 1800 or another decice.
Peer Node Number (Default)
is the Switch number of the remote device.
Peer Node Port (Default)
is the Port number on the remote device.
Table 13-6 Voice Interface Configuration Parameters
Parameter Valid Values Default Value
Interface Peer Node Type Default, SmartSwitch 1800 Default
Peer Node Number (Default) 1–61
1
1
Peer Node Port (Default) 0–15
1
0
Local Node Number (Default) 1–61
1
2
Local Node Port (Default) 0–15
1
1
Frame Relay Port 0–3 0
Frame Relay DLCI 16–991 16
Node Name=node_xyz
Voice Interface Configuration Parameters
* Interface Number 1
A Interface Peer Node Type SmartSwitch 1800
B Peer Node Number (Default) 1
C Peer Node Port (Default) 0
D Local Node Number (Default) 2
E Local Node Port (D efault) 1
F Frame Relay Port 0
G Frame R elay D LCI 16
H Enable Fragmentation N
Option: