Filter
Top Products
10-2 SmartSwitch 1800 4.0 User Guide, Rev 01
Configuring BSC Interactive Port Records
Once the necessary Node (Chapter 4) and protocol (Chapter 5) parameters have been
configured, press
[A]
at the Port Configuration Menu (or
[A], [C], [A]
from the Main
Menu. When prompted, enter a port number (or press
[Enter]
to accept the default of
0
). Valid port numbers depend on the model of SmartSwitch 1800—see port locations
on page 6-1.
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See Table 10-1 on page 10-
4.) The following figure is an example of an existing port.
Figure 10-1 BSC Interactive Port Record
[A],[C],[A]
from Main Menu
If
BSC Type
(item J) is
2-HPAD
, item K will be
Answer Non-Configured
.
After making any changes, be sure to press
[F7]
to update the
system memory. Otherwise, the changes will not take effect until
the next re-boot of the SmartSwitch 1800.
Pressing
[L]
lists more parameters, and pressing
[M]
displays a screen similar to the fol-
lowing. (All BSC Interactive parameters are listed in Table 10-1 and Table 10-2.)
Node Name=n odexyz
BSC Interactive Port Parameters (screen 1 of 2)
* Port: 1 Link State: Linkup
* I/O:–UNIVERSAL
Database System Memory
A Port Type BSC Inter BSC Inter
B Physical Port Interface V.35 V.35
C Blocked Port Flag N N
D Line Speed 9600 bps 9600 bps
E Retransmission Period (ms) 2000 2000
F Maximum Retransmissions 5 5
G Maximum Bytes per Frame 4105 4105
H Generate Clock Y Y
I Rcv Clock (TT) from DTE N N
J BSC Type 1–tpad 1–tpad
K Activate Connection w/o poll Y Y
L Interactive Parameters - Screen 2
M Subscriber I nformation - Screen 3
Option: