Filter
Top Products
8-30 SmartSwitch 1800 4.0 User Guide, Rev 01
If you are replacing called or calling address with original user data,
all the replacing characters must be digits. Also, the user data must be
specified in the template ID.
T
= Text (valid for replacement of user data only). Type
T
followed (with no spaces)
by the text that will replace the user data.
Replacing Protocol ID
Press
[E]
at the Translation Template Maintenance Menu. When prompted, enter a
string of up to four hex bytes. If fewer than four bytes are entered, the remaining field
is filled with zeroes.
Replacing Facilities
Press
[F]
at the Translation Template Maintenance Menu. When prompted, enter a
string of up to 109 hex bytes.
Translation Examples
Example 1 – Replacing the first four digits of the called address with digits from the
user data field:
Assume the Template ID is
3110*U*
and the called address field in the template is
U1234X5
. A packet with called address
31101234567890
and user data
5678
is
received. The packet matches Template ID
3110*U*
; therefore, a translation
occurs as follows:
◆
U1234
of
U1234X5
indicates that positions 1, 2, 3, and 4 of the user data of
the received packet (
5678
) will replace the first four digits of the called
address (
3110
).
◆
X5
of
U1234X5
takes the fifth position of the template (
*
) and searches for a
match in the part of the original called address not yet translated
(
1234567890
). (The match is found in the entire string
1234567890
.)
The translated called address is
56781234567890
.
Example 2 – Appending the subaddress from the user data to the called address:
Assume the Template ID is
3110*U??
and the called address field in the template
is
X12345U12
. A packet with called address
311012345678
and user data
99
is
received. The packet matches Template ID
3110*U??
; therefore, a translation
occurs as follows:
◆
User data
99
from the packet is appended to the called address
311012345678
.
The translated called address is
31101234567899
.