Cabletron Systems 1800 Switch User Manual


 
8-4 SmartSwitch 1800 4.0 User Guide, Rev 01
Pressing
[G]
will display a list of all CUGs configured for this port, along with their
associated indices.
Configuring a Network Trunk
A network trunk is a link between SmartSwitch 1800/FRM/FRX nodes, over X.25.
Other ports in the node can be assigned to a "trunk group," which will cause those
ports to be disabled if the network trunk is not operational (and enabled when the trunk
becomes operational). One network trunk in a node can be assigned to another
network trunk's group; however, disabling/enabling a network trunk will not affect
another network trunk in that trunk's group.
Figure 8-3 X.25 Port Trunk Parameters
If
Network Trunk
is
N
, the rest of the above screen has no relevance.
You can add or delete one or more ports as described in menu entries B–E in Figure
8-3. To add or delete a range of sequentially numbered ports of the same port type,
press
[D]
or
[E]
and enter (when prompted) the port type, first port, and last port. The
screen will be re-displayed, with the
Y/N
status changed for each affected port.
Adding or deleting a range has no affect on any port types within that range
other than the type specified.
To add or delete a single port, multiple ports that are not in sequence, or multiple ports
of different types, press
[B]
or
[C]
and enter a port number. The screen will be re-dis-
played, with the
Y/N
status changed for the port. Repeat this process for each port you
want to add or delete.
Node Name=nodexyz
X.25 Port Parameters (screen 5 of 6)
* RLP: 0 Port: 1 Link State: Linkup
* I/O: UNIVERSAL
Database
A Net w o rk T r unk Y
B Add to Trunk Group
C Delete from Trunk Group
D Add a Range to Trunk Group
E Delete a Range from Trunk Group
Ports Associated with Network Trunk
012 3
NNN N
Option: