Filter
Top Products
Statistics Displays 21-11
LAN Interface Statistics Displays
To dispay LAN Interface statistics, press
[G]
at the Statistics Menu. When prompted,
enter:
●
LAN Card Number
: Press
[Enter]
, accepting the default (and only valid value)
of
0
.
●
Report Interval
:
5–65535
. (Default is
5
.)
Figure 21-10 LAN Interface Statistics Display
[E],[G]
from Main Menu
This example shows an Ethernet interface. A Token Ring interface display
is similar. (Statistics for both are listed later.)
Information in this Display:
●
Hardware Status
– will be one of these:
◆
Not Installed
◆
Failed Startup Diagnostics
◆
Failed due to Configuration Problem
◆
Not Operational due to Hardware Fault
◆
Operating Marginally due to Soft Faults
◆
Fully Operational
●
MAC Status
– can be either/both/neither of these:
◆
Bound
– the MAC and protocol drivers are linked to enable communication
between them.
◆
Open
– the OpenAdapter function, which activates the adapter's network
connection, is enabled.
Node Name=node_xyz
LAN Card Statistics Dis play
Card Number: 0 Type: Ethernet MTU: 1500
Report Interval (sec): 5
Current Time: 6/05/97 10:32:45
Hardware Status: Fully Operational
MAC Status: Bound, Open
Packet Filters: Directed/Multicast or Group/Functional, Broadcast
STATISTIC CURR CUMULATIVE STATISTIC CURR CUMULATIVE
Packets In 21 269134 Packets Out 21 269420
Bytes In 8161 139690157 Bytes Out 8161 139822450
Multi-Cast In 0 0 Multi-CastOut 0 0
Broadcast In 0 0 Broadcast Out 0 0
Frm Dropped In 0 0 Frm Dropped Out 0 0
Q Dropped In 0 0 Dropped Timeou t 0 0
Errors In 0 0
Alignme nt Errors 0 0 Xmit w /1 Coll 0 0
Overrun Er ror s 0 0 Xmi t w /mu l Col l 0 0
Xmt/Deferral 0 0 Xmt CD Heartbeat 0 0
Not Xmt (Coll) 0 0 Frm w/Lost CS 0 0
Late Collision 0 0 Underruns 0 0
F4: Clear Cumulative Statistics, Others: Exit