Cabletron Systems 1800 Switch User Manual


 
20-2 SmartSwitch 1800 4.0 User Guide, Rev 01
Displaying Port Status
Press
[B]
at the Status Displays Menu to display the status of all serial lines on this
node (LAN port status is not displayed).
Figure 20-2 Port Status Display
[C],[B]
from Main Menu
Information in this Display:
P
– is the port number.
Type
– is the port type:
FRL
= Frame relay
X25
= X.25
SNA
= SNA
BSI
= BSC Interactive
BSI
= BSC Batch
ASY
= Async PAD
VCE
= Voice
LOG
= Logical
Eth
= Ethernet.
PPS
– is packets per second passing through the port.
Conn#
– is the number of virtual connections currently in use.
State
for non-Voice ports:
Linkup
– The necessary level 1 modem signals are present, and the level 2
link is up. (For frame relay PVCs, this state means that LMI is running.)
Restarting
– Level 2 is up and level 3 is starting its initial handshake
sequence.
Operational
– The line is up and ready to establish a connection or transfer
data. On a frame relay logical DTE port with link layer management con-
figured, this state means that the port has received a Full Status Response
from the DCE (frame relay switch), as a result of a Full Status Enquiry sent
by the SmartSwitch 1800.
On a frame relay logical DCE port, this state means that the port has received
a Full Status Enquiry from the attached DTE.
Node Name=node_xyz
Port Status Display (Page 1)
P Type PPS Conn# State P Type PPS Conn# State
0 FRL 62 4 Operational 1 SNA 127 12 Operational
2 FRL 112 7 Operational 3 SNA 60 6 Operational
4 VCE 10 1 On_Hook 5 VCE 20 1 On_Hook
0 Ethernet
F1: Login