System Events 22-7
312.
Tran Frm/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Transmitted Frames/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.)
Action: If this happens frequently, you may need to reroute some traffic.
313.
RTrn Frm/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Retran
(Retransmitted)
Frames/Sec (*100)
has
exceeded the threshold (
T:“n”
) that was set by the user. (
C:“n”
is the
current value.)
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
314.
FCS Rej/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
FCS
(Frame Check Sequence)
Errors/Sec (*100)
has
exceeded the threshold (
T:“n”
) that was set by the user. (
C:“n”
is the
current value.) A value consistently greater than zero indicates line
problems.
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
315.
Log Rej/Sec exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Logical Rejects/Sec (*100)
has exceeded the
threshold (
T:“n”
) that was set by the user. (
C:“n”
is the current
value.) Logical Rejects are the sum of Rejects and Frame Rejects. A
value consistently greater than zero indicates line problems.
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
316.
Trn Err Ratio exceeded T:“n” C:“n”
Severity: 4
Meaning: The port statistic
Transmit Error Ratio
has exceeded the threshold
(
T:“n”
) that was set by the user. (
C:“n”
is the current value.) The
Transmit Error Ratio is the ratio of retransmitted frames per second
to successfully transmitted frames per second.
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
317.
Rcv Err Ratio exceeded T:“n” C:“n”
Severity: 4