Filter
Top Products
On-line Operations 19-11
If sending database files and operating software files, send
all of one type, then be sure to repeat step 3 to change the
directory to which the remaining file(s) will be sent.
Enable/Disable Operations
Disabling and Enabling Ports
Press
[B]
at the Operations Menu to display the On-Line Port Operations
Menu:
Figure 19-1 On-Line Port Operations Menu
[B],[B]
from Main Menu
Operations A–D disable or enable a single port or a sequential range of same-type
ports (e.g., all SNA ports from port 1 to port 3). The operations can be useful for per-
forming maintenance on ports without shutting down the node. They are also used to
activate a PVC by disabling, then enabling, both ports after the PVC record has been
created.
Select an operation from the menu (Figure 19-1), items A–D. When prompted:
●
If enabling or disabling a single port, enter:
◆
RLP Port
:
0–7
for physical ports,
8–63
for logical ports. Valid numbers for
physical ports depend on the model of SmartSwitch 1800—see port loca-
tions on page 6-1.
●
If enabling or disabling a range of ports, enter:
◆
Port Type
:
1
(X.25),
2
(frame relay),
3
(async),
4
(SNA),
5
(BSCI),
6
(BSCB), or
7
(Voice).
Node Name=n ode_xyz
On-Line Port Operations
A Disable a Port
B Disable a Range of Ports
C Enable a Por t
D Enable a Range of Ports
E Quiesce a Port
F Quiesce a Range of Ports
G Unquiesce a Port
H Unquiesce a Range of Ports
Option::