On-line Operations 19-13
Disabling and Enabling SDLC PUs
These operations disable or enable the link station connection between the node and a
PU or a range of PUs (grouped by sequential port numbers).
Press
[G]
at the Operations Menu to display the following figure.
Figure 19-2 On-Line SDLC PU Operations Menu
[B],[G]
from Main Menu
Select the desired operation from the menu. When prompted:
●
If enabling or disabling a single
PU
, enter:
◆
RLP Port
:
0–7
. Valid numbers for physical ports depend on the model of
SmartSwitch 1800—see port locations on page 6-1.
◆
PU station address
:
0–ff
.
●
If enabling or disabling a range of PUs, enter:
◆
From port
:
0–7
. Valid numbers for physical ports depend on the model of
SmartSwitch 1800—see port locations on page 6-1.
◆
To port
:
0–7
.
Node Name=node_xyz
On-Line SDLC PU Operations
A Disable an SDLC PU
B Disable a Range of SDLC PUs
C Enable an SDLC PU
D En able a R ange of SDLC PUs
Option::