Filter
Top Products
15-12 SmartSwitch 1800 4.0 User Guide, Rev 01
LAN Interface Parameters
1
Valid LAN interface depends on hardware model. Default value is
Ethernet
or
8 02. 5
(depending on hardware) for Interface
0
, and
FRL
for Interface
1–63
.
2
If set to greater than
0
(see note 4),
RIP Age Timer
must be 3 times longer than
Periodic
RIP Timer
, and
SAP Age Timer
must be 3 times longer than
Periodic SAP Timer
.
3
A value of
0
disables aging.
Table 15-9 IPX LAN Interface Parameters
Parameter Valid Values Default Value
Blocked Port Flag Y/N N
Interface Type
Ethernet, 802.5
Depends on inter-
face number
1
Frame Type TYPE_II, RAW, LLC, SNAPI TYPE_II
Maximum Transmission Unit
(frame size) Ethernet:
45–1518
802.5:
48–4096
1518
4096
IPX Network Address 1–fffffffe 000 00000
Priority 0–9 5
Bandwidth Allocation Group 1–16 1
Port Diagnostics Enabled Y/N N
NetBIOS Enabled Y/N N
NetBIOS Hops 0–255 8
Periodic RIP Enabled Y/N N
Periodic RIP Timer
(seconds)
1–65535
2
60
Periodic SAP Enabled Y/N N
Periodic SAP Timer
(seconds)
1–65535
2
60
RIP Enabled Y/N N
RIP Age Timer
(seconds)
0–65535
2,3
180
RIP Maximum Size
(bytes)
54–446 446
SAP Enabled Y/N N
SAP Age Timer
(seconds)
0–6 55 35
2,3
180
Transport Time
(55ms ticks)
1–255 1
Serialization Enabled Y/N N
Watchdog Spoofing Enabled Y/N N
LAN Card Number 00