FRM Configuring Frame Relay 7- 11
The first line of parameters applies to all DLCIs on the port (or in the node if
[F2]
is
pressed). The second line exists only for DLCIs configured as primary DLCIs in
backup configurations. In the example in Figure 7-5, DLCI 50 is a primary. All the
parameters are listed in Table 7-4 (on page 7-15).
The parameters in the first line are:
●
Port
,
DLCI
are self-explanatory.
●
ICIR
=
Committed Information Rate (In)
●
IBC
=
Committed Burst Size (In)
●
IBE
=
Excess Burst Size (In)
●
OCIR
=
Committed Information Rate (Out)
●
OBC
=
Committed Burst Size (Out)
●
OBE
=
Excess Burst Size (Out)
●
BECN
=
BECN Recovery Count
●
Pri
=
Outgoing DLCI Priority
●
Proto
=
Enable BackupProtocol
The parameters in the second line are:
●
Grp
=
Backup Group Number
●
RRLP
=
Remote RLP
●
RPrt
=
Remote Port
●
RDLCI
=
Remote DLCI
●
SOT
=
Switchover Timer
●
SBT
=
Switchback Timer
●
TTH
=
Time to Hold Data While Waiting