Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-65
Ver. 07-02
Parameter
Description: Specifies the subject interface name set in the ip information
or ip-address information. (The
ip information or the ip-address
information
should be set before inputting this command.) RM
Ethenet and Tunnel interface are not supported. For details,
refer to Table 1-5.
Default: No default is possible.
Description: Specifies the Inbound/Outbound. Either one or both of the
Inbound/Outbound can be set against one interface.
in: Inbound (specification of the frame input side)
out: Outbound (specification of the frame output side)
Default: No default is possible.
Description: Nullifies the flow control by input/output interface.
Default: Flow control is executed.
Description: Specifies the list number.
Default: Default is possible only in the indicated case. All the lists are
displayed at default.
Range of value: 1 to 20,000 (ten-decimals)
Description: Specifies the range of a list number. This parameter can be
specified only when a blank list number is displayed.
Default: The range of the list number being the object of indication will
the number of all the lists totaling the IPv4QoS list and
IPv6QoS list.
Range of value: 1-255 (decimal) are designated to <No>. (Ver. 05-01, Ver.
06-00)
1-1000000 (decimal) are designated to <No.>. (Ver. 06-01)
Description: Displays the blank list number.
Default: Cannot be omitted when the blank list number is displayed.
Description: Displays the top blank list number in the specified range.
Default: Cannot be omitted when the top list number of a blank list
number is displayed.