Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-72 GR2K-GA-0014
Ver. 07-02
protocol out of range The input value is out of the prescribed range. Set the range of 1 to
255 to the protocol number.
QoS IP configuration is already defined. flow qos cannot be set because qos_ip has been set. To set flow
qos, delete qos_ip.
Relation between regular protocol and
premium protocol are inconsistent.
The relation between the protocol of normal packet flow detecting
condition and the protocol of important packet flow detecting
condition is in disagreement. Make the protocol of normal packet flow
detecting condition an “IP” or have the both protocols agree with
each other.
replace_exp out of range The input value is out of the prescribed range. Set the range of 0 to 7
to the exp field rewrite value.
replace_tos out of range The input value is out of the prescribed range. Set the range of 0 to
255 to the tos rewrite value.
replace_user_priority out of range The input value is out of the prescribed range. Set the range of 0 to 7
to the VLAN priority rewriting value.
tos out of range The input value is out of the prescribed range. Set the range of 0 to
255 to the tos.
upc bandwidth is not in range of 0 to 2400000. The input value is out of the prescribed range. Set the range of 0 to
2400000 to the bandwidth.
upc_burst is not in range of 0 to 131072. The input value is out of the prescribed range. Set the range of 0 to
131072 to the burst size.
upper out of range The input value is out of the prescribed range. Set the range of 0 to
65535 to the upper value of IP user data length.
user_priority out of range The input value is out of the prescribed range. Set the range of 0 to 7
to the VLAN priority value.
vlan out of range The input value is out of the prescribed range. Set the range of 1 to
4095 to vlan.
Can not set replace_tos or replace_dscp
because penalty_discard is already defined.
Tos rewrite value or dscp rewrite value cannot be set because the
contract band breaching queuing value has been defined. To set the
contract band breaching queuing value, delete tos rewrite value or
dscp rewrite value.
Can not set tos_map or dscp_map because
penalty_discard is already defined.
Tos_map or dscp_map cannot be set because the contract band
breaching queuing value has been defined. To set the contract band
breaching queuing value, delete tos_map or dscp_map.
replace_dscp out of range The input value is out of the prescribed range. Set the range of 0 to
63 to the dscp rewrite value.
penalty_dscp out of range The input value is out of the prescribed range. Set the range of 0 to
63 to the contract band breaching dscp rewrite value.
dscp out of range The input value is out of the prescribed range. Set the range of 0 to
63 to the dscp value.
Can not set IPv4 tos and exp. Tos value and exp field value cannot be specified in the entry of the
IPv6 flow information.
Can not set IPv4 exp. Exp field value cannot be specified in the entry of the IPv6 flow
information.
Can not set IPv4 replace_exp. Exp field value cannot be specified in the entry of the IPv6 flow
information.
Can not set IPv4 tos_map. tos_map cannot be specified in the entry of the IPv6 flow information.
Can not set IPv4 replace_tos. Tos rewrite value cannot be specified in the entry of the IPv6 flow
information.
Can not set IPv4 penalty_tos. Contract band breaching tos rewrite value cannot be specified in the
entry of the IPv6 flow information.
Can not set IPv4 tos_map and penalty_tos. Contract band breaching tos rewrite value and tos_map cannot be
specified in the entry of the IPv6 flow information.
Table 5-8 Flow Information Error Messages (continued)