Filter
Top Products
Configuration Error Messages
GR2K-GA-0014 5-25
Ver. 07-02
bgp: invalid ttl value at <Value> not in range 1
to 255
The specified TTL value is invalid. Specify within the range of 1 to
255.
<Value>: Specified TTL value
bgp: invalid vpn number value at <Value> not
inrange1to<Max_Value>
The specified VPN number value is invalid. Specify within the range
of 1 to <Max_Value>.
<Value>: Specified vpn number
<Max_Value>: Maximum VPN number
bgp: ipv4-uni option is not supported for this
peer type
The local peer has the ipv4-uni option designated. Do not designate
the ipv4-uni option in the local peer.
bgp: ipv4-vpn option not valid for vpn The Ipv4-vpn option is defined for VPN. This option may only be
defined for other than VPN.
bgp: keep-none-vpn option not valid for vpn The Keep-none-vpn option is defined for VPN. This option may only
be defined for other than VPN.
bgp: lcladdr option is not supported for this
peer type
The local peer has the lcladdr option designated. Do not designate
the lcladdr option in the local peer.
bgp: local-as may only be used with external
peers
The Local-as option is defined for other than external peers. This
option may only be used for external peers.
bgp: local-as option is not supported for this
peer type
The local peer has the local-as option designated. Do not designate
the local-as option in the local peer.
bgp: member-as must be different
autonomous-system
The number of AS to which this system belongs is the same as the
member AS. Specify different numbers for AS and member AS.
bgp: member-as option not valid for vpn The Member-as option is defined for VPN. VPN does not support
confederation.
bgp: metric-out option is not supported the
policy group
metricout option is specified by policy group.
Specify the option from export filter side.
bgp: multihop option is not supported for this
peer type
The local peer has the multihop option designated. Do not designate
the multihop option in the local peer.
bgp: multipath option not valid for vpn route The Multipath option is defined for VPN. VPN does not support the
multipath option.
bgp: multipath-option (all-as) must be set
compare-med (all-as)
Multipath-option (all-as) must be set compare-med (all-as).
When specifies all-as parameter of multipath-option, specify all-as
parameter of compare-med.
bgp: nexthopself option is not supported for
this peer type
The local peer has the nexthopsel option designated. Do not
designate the nexthopsel option in the local peer.
bgp: nogendefault option is not supported for
this peer type
The local peer has the nogendefault option designated. Do not
designate the nogendefault option in the local peer.
bgp: No Router ID has been assigned for
comparison to peer <Peer>
No router ID is defined. Define a router ID.
<Peer>: Specified peer
bgp: Number of local-as is more than
maximum permited(16)
Number of local-as is more than maximum permited (16). Specify
maximum number of local-as of 16 or less.
bgp: Only External groups may be
Confederation Peer
The confederation parameter is specified for the internal peer. Do not
designate a confederation for the internal peer.
bgp: Only Internal, IGP or Routing groups
may be route reflection clients
In the external peer, a reflector-client parameter is specified.
In the external peer, do not specify a reflector-client parameter.
bgp: only one choice the gateway option or
the setnexthoppeer option
The gateway parameter and the setnexthoppeer parameter are
specified at the same time. Specify either the gateway parameter or
the setnexthoppeer parameter.
bgp: only one choice the refresh option or the
refresh-128 option
refresh and refresh-128 parameters are specified simultaneously.
Specify a refresh or refresh-128 parameter.
bgp: out of range The parameter-specified range is exceeded in the input command
syntax. Numeric values of more than 4294967296 are contained.
Reconfirm a parameter.
bgp: passive option is not supported for this
peer type
The local peer has the passive option designated. Do not designate
the passive option in the local peer.
Table 5-5 Routing Protocol Error Messages (continued)