Filter
Top Products
Configuration Error Messages
GR2K-GA-0014 5-17
Ver. 07-02
Maximum number of IP addresses are already
defined on the RP.
Number of IP addresses exceeded maximum value. Decrease
number to 256 per RP.
Maximum number of IP configurations are
already defined.
No more IP configurations can be set. Check the network
configurations.
Maximum number of linklocal address are
already defined.
No more linklocal address can be set. Check the network
configurations.
Maximum number of policy group name are
already defined.
Maximum number of policy groups (256) are already defined.
Check the network configuration.
Maximum number of relay group name are
already defined.
Maximum number of policy groups (256) are already defined.
Check the network configuration.
Maximum number of Vpn Name
configurations are already defined.
VPN Name can be set no more. Reconfirm the network
configuration.
Network address of IP address is different
from network address of broadcast address.
Network address of IP address is different from network address of
broadcast address. Specify the value so the network address of IP
address becomes the same as the network address of broadcast
address.
Next hop address not specified. Next hop address is not specified. Set next hop address number.
No such dhcp-client interface
<Interface_Name>
The designated interface information is not available. Designated the
name of the designated interface information. Interface name
attached to the <Interface_Name> configuration defining information.
No such insert index. An entry cannot be inserted on specified entry number. Set entry
number not exceeding the number of set entries.
No such interface <Interface_Name> send
dhcp-client-id
The designated interface’s "send dhcp-client-id" information is not
available. Designated the defining information’s name of the
designated interface information. Interface name attached to the
<Interface_Name> configuration defining information.
No such interface <Interface_Name> send
host-name
The designated interface’s "send dhcp-host-id" information is not
available. Designated the defining information’s name of the
designated interface information. Interface name attached to the
<Interface_Name> configuration defining information.
No such line router. No line router is set. Set the line router first.
No such name <name>. Specified configuration information name not found. Specify existing
definition information name. <name> configuration information name.
No such policy list number. No policy list number is set. Set the policy list number.
No such relay group name. No such relay group name. Specify DHCP relay group that has been
set.
No such relay list number. No such DHCP relay address entry. Specify DHCP relay address
entry that has been set.
No such set index. An entry cannot be set on specified entry number. Use entry number
not exceeding the set number of entries. To add entries, use the
number of set entries +1 for entry value.
Null interface already defined. Null interface is already defined. Check the interface that is set.
Only the interface name can be set to the
interface used for l2transport.
It is only possible to set the interface name in interfaces used in
EoMPLS L2 transports.
Policy group name not specified. Policy group name is not specified. Set policy group name.
Policy list not specified. Policy list is not specified. Set policy list.
Policy list number not specified. Policy list entry number is not specified. Set policy list entry number.
Reject object, dhcp-client The configuration defining information for the DHCP client cannot be
set. Confirm the configuration defining information.
Reject object, nat The configuration defining information for the NAT cannot be set.
Confirm the configuration defining information.
Relations between connect type and backup
interfaceinbackupconfigurationare
inconsistent.
Relations between connect type and backup interface in backup
configuration are inconsistent. Specify point to the connect type of
interface specified by backup destination interface.
Table 5-4 IP Information Error Messages (continued)