Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-208 GR2K-GA-0014
Ver. 07-02
Parameters
Description: This parameter sets the relevant interface name established in
the bridge interface settings. (Before entering this command,
establish the bridge interface settings.)
Default: Cannot be omitted.
-priority_class <No.>
Description: This parameter sets the output priority class. In the case of
output priority control, used as the output priority class. In
the case of bandwidth and round-robin, used as the queue
number.
Default:
4
Range of value: 1-8
Description: This parameter sets the queuing priority class.
Default:
4
Range of value: 1-4
Examples
1. Setting parameters:
To set the output priority class 3 and queuing priority class 1 in the interface
named
office1:
2. Modifying parameters:
Tochangethequeuingpriorityclassoftheinterfacenamed
office1 from 1 to 2: