Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4-32 GR2K-GA-0014
Ver. 07-02
Related Configuration Object
None
Precautions
The board slot defined as disabled with the disable object is not restarted even
when the upper hardware is re-initialized. Such board slot is not restarted with
the free command (refer to the GR2000 Operations Commands, Vol. 1.Tounlock
the status, you must delete the disablement definition.
Whether any hardware has disablement definition or not can be confirmed by the
show router command or the MIB gr2kRpOperStatus in GR2000 Operations
Commands, Vol. 1.
If the set command with the disable objecthasbeenexecutedonanNIFfor
OC-3c/STMATM1oranRPwithsuchNIFinstalled,theT/RLEDindicatorfor
data transmission turns on. This is not an error and the command execution
ends normally.
If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.