Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-24 GR2K-GA-0014
Ver. 07-02
bgp: external peer must not have the same
AS as we do locally member AS (<As>)
Peer AS number of external peer is the same as local router AS
number. Do not specify AS number of the local router in the peer AS
number of external peer.
<As>: Local router member AS number>
bgp: gateway not a host address on an
attached network : <Address>
Specified gateway is not the host address on the connected network.
Specify gateway address on the defined interface address.
<Address>: Specified gateway address
bgp: gateway option is not supported for this
peer type
The gateway option is designated in the local peer. Do not designate
the gateway option in the local peer.
bgp: holdtime option is not supported for this
peer type
The holdtime option is designated in the local peer. Do not designate
the holdtime option in the local peer.
bgp: ignorefirstashop option is not supported
for this peer type
The ignorefirstashop option is designated in the local peer. Do not
designate the ignorefirstashop option in the local peer.
bgp: Interface not found at <Address> Interface at the specified interface address is not found. Use a
defined interface address.
<Address>: Specified interface address
bgp: interfaces may only be specified for
internal routing groups
Interface parameters are specified for other than routing peers. Do
not specify an interface parameter for other routing peers.
bgp: invalid as_count value at <Value> not in
range 1 to 25
AS count value is invalid. Specify a value within the range of 1 to 25.
Ascount<Value>: Specified account value
bgp: invalid autonomous system value at
<Value> not in range 1 to 65534
AS number is invalid. Specify a value within the range of 1 to 65534.
<Value>: Specified AS number
bgp: invalid BGP metric value at <Metric> not
in range 0 to4294967295
In the BGP definition, BGP metric is invalid. Specify a value within
the range of 0 to 4294967295.
<Metric>: Specified metric value
bgp: invalid community id value at <Value>
not in range 0 to 65535
In the comm-split parameter, the range of Comm_id value is invalid.
Specify a value within the range of 0 to 65535.
<Value>: Specified Comm_id value
bgp: invalid hold time value at <Value> not in
range 0 to 65535
Hold timer is invalid. Specify a value within the range of 0 or 3 to
65535.
<Value>: Specified hold timer value
bgp: Invalid interface at <Address> Interface at the specified interface address (lcladdr parameter in bgp)
is not found. Use a defined interface address.
<Address>: Specified interface address
bgp: invalid lcladdr at <Address> The interface address of the designated leladdr parameter is
incorrect.
<Address>: Specified interface address
bgp: invalid number of communities value at
<Value> not in range 0 to 25
Specified community count is over the limit.
Specify a value of 25 or less.
<Value>: Specified communities value
bgp: invalid octet value at <Value> not in
range 0 to 255
More than 255 values are defined in dot notation.
Specify value within the range of 0 to 255.
<Value>: Specified value
bgp: invalid policy group number value at
<Group Number> not in range 1 to 16
The specified policy group number is invalid. Specify within the range
of 1 to 16.
<Group Number>: Specified masklen
bgp: invalid preference value at <Value> not
inrange2to255
Preference value is invalid. Specify a value within the range of 0 to
255.
<Value>: Specified preference value
bgp: invalid seconds value at <Value> not in
range 0 to 4294967295
Timer value is invalid. Specify a value within the range of 0 to
4294967295.
<Value>: Specified timer value
Table 5-5 Routing Protocol Error Messages (continued)