Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-34 GR2K-GA-0014
Ver. 07-02
Operation Parameter
If the operation parameter is either set or changed, please be sure to set this
parameter at the head of the whole operation parameter.
Default: None (No default is possible when designating the operation.)
Range of value: None
Operation which agrees with the flow detecting condition is designated.
-forward:The agreed package is relayed.
-drop :The agreed packet is discarded.
Default: -forward
Range of value: None
The policy routing function is made effective. When relaying a packet that agrees
with the filter condition, the packet is transmitted to the output destination
designated by this option. Designate "in" (Inbound) for the list information that
has set the policy routing, as the flow control of the reception side.
<InterfaceName>:Designatetheinterfacenameoftheoutputdestination(the
interface name set in the IP information). (Refer toTable 1-27.))
Default: forward
Range of value: <IP Address>: Set the IPv4 addresses shown below:
Class A : 1.0.0.1-126.255.255.254
Class B : 128.1.0.1-191.254.255.254
Class C : 192.0.1.1-233.255.254.254
Table 1-27 List of Interfaces Supporting Flow Control
Interface Name
Availability of Support
<Line Name> √
RmEthernet ---
<DLCI Name>
√
<VC Name> √
<Group Name> √
<Timeslot Name> √
<Peer Name> √
<Tunnel Name> ---
<VLAN Name> ---(1*)
<Session Name> --- (1*)
√
: Setting possible.
-: Setting impossible
*1: VLAN line and PPOoE session are not supported.