Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-64 GR2K-GA-0014
Ver. 07-02
5.8 Flow Information Error Messages
Table 5-8 Flow Information Error Messages
Message Contents
Can not change cops_range. The list number cannot be changed because it has already been
used in a COPS function. Define cops no or delete the COPS
configuration definition. [Ver.06-03]
Can not delete all action because premium is
defined.
The action cannot be deleted totally because the important packet
flow detecting conditions (premium) have been defined. Input all the
detecting conditions again to nullify the Action.
Can not delete flow list because COPS used. The list number cannot be changed because it has already been
used in a COPS function. Define cops no or delete the COPS
configuration definition. [Ver.06-03]
Can not delete flow qos, flow filter because
COPS used.
The list number cannot be changed because it has already been
used in a COPS function. Define cops no or delete the COPS
configuration definition. [Ver.06-03]
Can not delete IP configuration referred by
flow filter configuration.
The following factors are conceivable.
1).The specified interface cannot be deleted because the interface
name specified in the flow filer has already been set. To delete the
specified interface, it is necessary to delete the interface name
specified in the flow filter.
2).The designated interface cannot be deleted because an interface
name that has set the data from a policy server using the COPS
function has been set. To delete the designated interface, delete the
designated interface’s data set from the policy server.
Can not delete IP configuration referred by
flow qos configuration.
The following factors are conceivable.
1).The specified interface cannot be deleted because the interface
name specified in the flow filer has already been set. To delete the
specified interface, it is necessary to delete the interface name
specified in the flow filter.
2).The designated interface cannot be deleted because an interface
name that has set the data from a policy server using the COPS
function has been set. To delete the designated interface, delete the
designated interface’s data set from the policy server.
Can not delete min_rate and max_rate
because premium is already defined.
The maximum band restriction or the minimum band assurance
cannot be deleted because the important packet flow detecting
conditions (premium) have been defined. Input all the detecting
conditions again to delete the maximum band restriction or the
minimum band assurance.
Can not delete policy_group configuration
referred by flow filter configuration.
The specified policy group cannot be deleted because the policy
group name specified in the flow filer has already been set. To delete
the specified policy group, it is necessary to delete the policy group
name specified in the flow filter.
Can not delete replace_tos or replace_dscp
because penalty_tos or penalty_dscp is
already defined.
The tos rewriting value cannot be set because the contract band
breaching tos rewriting value has been defined. To set the tos
rewriting value, delete the contract band breaching tos rewriting
value.
Can not delete tos_map or dscp_map
because penalty_tos or penalty_dscp is
already defined.
Tos_map cannot be set because the contract band breaching tos
rewriting value has been defined. To set tos_map, delete the contract
band breaching tos rewriting value.
Can not delete upc or min_rate because
penalty_discard is defined.
The band setting cannot be deleted because the contract band
breaching queuing priority has been defined. Delete the contract
band breaching queuing priority, and then delete the band setting.
Can not delete upc because penalty_drop is
defined.
The band setting cannot be deleted because the contract band
breaching packet discard has been defined. Delete the contract band
breaching packet discard, and then delete the band setting.