Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-26 GR2K-GA-0014
Ver. 07-02
bgp: "peer local" can be used only with routing
peer group
A local peer is designated somewhere other than in the routing peer.
Always designate the local peer in the routing peer.
bgp: permit-asloop may only be used with
external peers
The permit-asloop option is defined for other than external peers.
This option can only be used for external peers.
bgp: policygroup can be used in same group
type
The settings of confederation parameters in the policy group are
different. The settings of confederation parameters in the policy
group must be the same.
bgp: policy-group may only be used with
external groups
Policy group is specified by other than external peer. The group
cannot be used by other than external peer.
bgp: policy-group should be used in the group
declaration only
Policy group is specified by other than peer group. Specify the group
as peer group option.
bgp: remove-private-as may only be used with
external peers
remove-private-as parameter is specified by other than external
peer. The parameter cannot be used by other than external peer.
bgp: remove_private_as option must be the
same in the policy group
The settings of remove-private-as parameters in the policy group are
different. The settings of remove-private-as parameters in the policy
group must be the same.
bgp: setnexthoppeer option is not supported
for this peer type
The local peer has thesetnexthoppeer option designated. Do not
designate the setnexthoppeer option in the local peer.
bgp: show-warnings option is not supported
for this peer type
The local peer has the show-warnings option designated. Do not
designate theshow-warnings option in the local peer.
bgp: site of vpn may only be used external
peers
Site of vpn is specified by other than external peer.
Site of vpn cannot be used by other than external peer.
bgp: syntax error Syntax error
bgp: the BGP member AS (<As1>) and peer
AS (<As2>) must be the same for internal
peers
The AS No. of the internal peer does not agree with the memberAS
number of the local device. As the AS No. of the internal peer and the
routing peer, specify the memberAS No. of the local device.
<As1>: memberAS No. of the local device
<As2>: AS No. of the remote device.
bgp: the holdtime for BGP group peers
(<Value>) is less than the minimum permitted
(3)
In the BGP peer group, specified hold timer value is less than
minimum value permitted. Use a value of 0 or 3 or more.
<Value>: Specified hold timer
bgp: the holdtime for BGP peer <Address>
(<Value>) is less than the minimum permitted
(3)
Hold timer value of specified peer is less than minimum value
permitted. Use 0 or 3 or more.
<Address>: Specified peer address
<Value>: Specified hold timer value
bgp: the IGP protocol must be specified for
routing peers using the proto option
For the routing peer, a proto parameter has not been specified.
For the routing peer, a proto parameter is essential. Specify a proto
parameter.
bgp: the lcladdr option should be used in the
group declaration only
The lcladdr parameter is different from that specified in the peer
group. Specify same lcladdr parameter in internal peer and routing
peer.
bgp: the local as can not be used in
confederation
The local-as is specified by other than external peer. The local-as
cannot be used by other than external peer
bgp: the metricout option should be used in
the group declaration only
The metricout parameter is different from that specified in the peer
group. Specify same metricout parameter in internal peer and routing
peer.
bgp: the peer group option must be the same
for policy group
The settings of peer group option in the policy group are different.
The settings of peer group option in the policy group must be the
same.
bgp: The peeras for an internal-type group
does not match the AS number of this router
Peer AS number for an internal peer is different from AS number of
local router. Specify local router AS number for peer AS numbers of
internal peer and routing peer.
bgp: the proto option may only be used for
internal routing groups
Proto parameter is specified in a peer other than a routing peer.
Proto parameter is valid only for a routing peer.
Table 5-5 Routing Protocol Error Messages (continued)