Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-202 GR2K-GA-0014
Ver. 07-02
Display settings
Parameters
Description: Sets the name of the relevant interface established in IP or
IP-address settings. (Before entering this command, establish
IP or IP-address settings.)
Default: Cannot be omitted
Description: Sets inbound/outbound. Set inbound, outbound, or both
simultaneously for one interface.
in: Inbound (setting frame input side)
out: Outbound (setting frame output side)
Default: Cannot be omitted.
Description: Sets QoS IP frame condition group names. (Before entering
this command, establish the QoS IP frame condition group.)
Default: Cannot be omitted.
Examples
1. Setting parameters (settings are inbound)
To set
IP frame condition group named ip1 in the interface named office1:
2. Setting parameters (settings are inbound and outbound)
To set the IP frame condition groups named
ip1 and ip2 respectively in the
interface designated inbound and outbound.