Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
3-20 GR2K-GA-0014
Ver. 07-02
Default: Undefined
Range of value: A string of up to 60 alphanumeric and special characters
enclosed in double quotation marks. When the string contains
only alphanumeric characters and no special characters
except period, you can omit double quotation marks. See Table
2-1, in GR2000 Configuration Commands, (universal CLI) Vol. 1
for allowable characters.
Description: Serves as a comment field where you can describe the
event-group contents using a character string. This parameter
corresponds to eventDescription of RFC1757.
Default: Brank
Range of value: A string of up to 79 alphanumeric and special characters
enclosed in double quotation marks. When the string contains
only alphanumeric characters and no special characters
except period, you can omit double quotation marks. See Table
2-1, in GR2000 Configuration Commands, (universal CLI) Vol. 1
for allowable characters.
Description: Sets the identification information for the person who created
this setting. This parameter corresponds to eventOwner of
RFC1757.
Default: Blank
Range of value: A string of up to 24 alphanumeric and special characters
enclosed in double quotation marks. When the string contains
only alphanumeric characters and no special characters
except period, you can omit double quotation marks. See Table
2-1, in GR2000 Configuration Commands, (universal CLI) Vol. 1
for allowable characters.
Example
Create RMON Ethernet event-group entries and show the resulting event-group
entries in the following order:
1. Using the snmp object with the set subcommand omitted, create an SNMP
Manager entry with the following properties:
Community name: rmon-mgr
SNMP Manager IP address: 30.1.1.1
MIB access mode: read/write
Trap option: trap
2. Using the event object with the set subcommand omitted, create an event-group
entry with the following properties:
RMON Ethernet event-group index number: 3
Event type: trap
Trap community name: rmon-mgr
3. Using the event object with the set subcommand omitted, create another
event-group entry with the following properties:
RMON Ethernet event-group index number: 3