Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-4 GR2K-GA-0014
Ver. 07-02
Connection branching:
Selects and transmits the packet to the specified DLCI/VC in
accordance with the flow detecting condition.
Constituting definition command
1, 3 flow filters (QoS flow information)
Interlocking with QoS transmission control
Queuemodeshallbesettocontrolthesequenceofoutputtingapackettothe
transmission queue in the interface. The queue mode includes the following five
catergories: output priority control, minimum band assurance, uniformity
assurance, minimum uniformity band assurance, and minimum band assurance
(kbps designation). The definition method defines a queue list to be set in the
transmission queue of the interface by using the QoS attribute (qos-queue-list)
and further sets a queue list to be used on each interface by using the QoS
interface information (qos-interface).
3.2 qos-queue-list (Qos queue attribute)
3.3 qos-interface (QoS interface information)
Figure 1-2 Control Range for QoS Queue Attribute and QoS Interface Information
Interlocking with QoS queue control
The queue control is a function that discards a packet to be stacked on the
transmission queue according to the queuing priority if the packet is stagnating
in the transmission queue. The function sets the pattern of queue length
permitting the queuing on each queuing priority by using the QoS discard mode
(qos-discard-mode).
Interface
(LINE,DLCI, etc.)
Flow Control (input)
Route Search
Transmission Control
Flow Detection
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
: Control range of this command
Defines using and unusing of each control.
Queue Control
Flow Control (output)
Flow Detection
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring