Hitachi GR2000 Series Network Router User Manual


 
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
1-32 GR2K-GA-0014
Ver. 07-02
Description: Sets the VLAN ID of tag-VLAN.
The list information that sets this parameter should be set in
(Inbound) and specified as the flow detection conditions on the
input side.
Default: Undefined. (VLAN ID is not contained in the flow detection
conditions.)
Range of value: 1 to 4095 (This parameter is valid only in RP-C and RP-D.)
Transmitter port numbers are designated.
If port number to be designated is one: nnnnn
If port number is designated by range:nnnnn-nnnnn
Default: None (the transmitter port number is not included in the flow
detecting condition.)
Range of value: 0 to 65535 (decimal). (Please refer to Table 1-24.)
Destination port numbers are designated.
If port number to be designated is one: nnnnn
If port number is designated by range:nnnnn-nnnnn
Default: None (the transmitter port number is not included in the flow
detecting condition.)
Range of value: 0 to 65535 (decimal). (Please refer to Table 1-24.)
TCP single-direction communication permit (having one ACK flag) is
designated.(note1)
Default: None (the ACK flag is not included in the flow detecting
condition.)
Range of value: None
Virtual circuit establishment permit (having one SYN fla) is designated.(Note1)
Table 1-24 General port number
Port Number (Decimal) Name
20/tcp File Transfer [Default Data]
21/tcp File Transfer [Control]
22/tcp Secure Shell Login
23/tcp Telnet
25/tcp Simple Mail Transfer
53/tcp 53/udp Domain Name Server
80/tcp World Wide Web HTTP
110/tcp 10/udp Post Office Protocol - Version 3
161/udp SNMP