Filter
Top Products
Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
5-8 GR2K-GA-0014
Ver. 07-02
Dch line not specified. Dch line not specified. When own telephone number is undefined on
Priisdn line, set Dch line.
Dlci not specified. A DLCI value has not been specified. Specify a DLCI value.
Duplicate dlci. The same DLCI values are used in the line. Make each DLCI value in
the line unique.
Duplicate IP address. The same IP address is set. The combination of a local address and
a remote address is set in another entry.
Duplicate subline number. The same subline number is used. Make each timeslot number in the
same line unique.
Duplicate timeslot. The same timeslot number is used. Make each timeslot number in
the same line unique.
Duplicate vc. The same VCI in VP is set. Set the unique value to all of the VCI in
VP.
Duplicate vpi. The same VPI in ATM is set. Set the unique value to all of the VPI in
ATM.
Echo success times is greater than echo trial
times.
The reference for Link Quality OK exceeds the number of link quality
tests. Set the reference for Link Quality OK below the number of link
quality tests.
Invalid backup interface name. Invalid backup interface name. Specify the different interface name
to backup source and backup destination. Or, specify the interface
not specified by other entry to backup destination interface name.
Invalid bod. Invalid bod. When Isdn Ppp is grouped with Ppp, set the same Bod
with other entry within the group to Ppp.
Invalid bod. Invalid bod. When Isdn Ppp is grouped, set the same Bod with other
entry within the group to Ppp.
Invalid dch line. Invalid dch line. Set the line without Dch line in line group.
Invalid interface name. Invalid interface name. Specify the interface not specified by other
entry to backup destination interface name.
Invalid line number. Specified line number not present in NIF. Specify a line number for
NIF.
Invalid line type. Invalid line type. Different line types are set within the same NIF.
Invalid local IP address. Local IP address value invalid. Enter a correct local IP address.
Invalid name <name>. Can not specify entered name of configuration information.
For subline: Set line name whose line type is ce3
For Timeslot: Specify either line name whose line type is bri, pri, j2,
t1, e1, or subline name.
For PPP: Specify either line name whose line type is serial, oc3pos,
oc12pos, oc48pos, t3, e3, or name of timeslot.
For Frame Relay: Specify either line name whose line type is serial
or name of timeslot.
For DLCI: Specify name set in frame relay.
For DLCI group: Specify name set in DLCI.
For Line Group: Line type is ISDN POOL on briisdn and Priisdn.
Specify a line on the same RP that is not set on the ISDN PPP.
For ISDN POOL: Line type is ISDN POOL on briisdn and Priisdn.
Specify a line on the same RP that is not set on the ISDN PPP or the
name of a Line Group on the same RP.
For ISDN PPP: Line type is ISDN POOL on briisdn and Priisdn.
Specify a line on the same RP that is not set on the ISDN POOL or
thenameofanISDNPOOLonthesameRP.
For ATM, VP, VC: Specify the line name whose line type is oc3atm,
oc12atm, 25atm.
For VC group: Specify VC on the same line. Specify vc on the same
line.
For group: Specify DLCI, VC, PPP, ISDN PPP name on the RP
already defined.
Table 5-3 Network Interface Error Messages (continued)