Filter
Top Products
Configuration Error Messages
GR2K-GA-0014 5-39
Ver. 07-02
options: invalid maximum paths value at
<Value> not in range 1 to 16
The specified maximum path count in options definition is invalid.
Specify in the range of 1 to 16.
<Value>: Specified maximum path count
options: invalid octet value at <Value> not in
range 0 to 255
More than 255 values are defined in dot notation. Specify value
within the range of 0 to 255.
<Value>: Specified value
options: out of range The parameter-specified range is exceeded in the input command
syntax. Numeric values of more than 4294967296 are contained.
Reconfirm a parameter.
options: syntax error Syntax error
ospf: 2 or more areas have been defined:
need to configure backbone
Although two or more OSPF areas have been defined, a backbone
area has not been defined. Define a backbone area.
ospf: authentication-key "<Key>" <Length>
longer than [ 8 | 16 ] characters
Specified authentication key is longer than 8 characters (for simple)
or16 characters (for md5). For simple, the length is up to 8
characters (or hexadecimal 16 digits). For md5, the length is up to 16
characters (or hexadecimal 32 digits).
<Key>: Specified authentication key
<Length>: Specified authentication key length
ospf: authentication-key longer than [ 8 | 16 ]
characters
Specified authentication key is longer than 8 characters (for simple)
or 16 characters (for md5). For simple, the length is up to 8
characters (or hexadecimal 16 digits). For md5, the length is up to 16
characters (or hexadecimal 32 digits).
ospf: day must be between 1 and 31 Specified date is invalid. Specify a value within the range of 1 to 31.
ospf: domain <Domain Number> duplicated OSPF domain number is duplicated. Do not define in duplication.
<Domain Number>: Specified domain number
ospf: duplicate area OSPF area ID is duplicated. Use a unique area ID.
ospf: duplicate entry at <Address> mask
<Mask> [exact | refine]
Network range is duplicated in the ospf definition. Use a unique
network range.
<Address>: Specified address
<Mask>: Specified mask
ospf: duplicate interface address in list at
<Address>
Interface address is duplicated in the ospf definition. Use a unique
interface address.
<Address>: Specified interface address
ospf: duplicate ospf clause OSPF definition is duplicated.
Delete one of the two
ospf: duplicate ospf interface parameter -
“cost”
Interface parameter “cost” is duplicated in OSPF definition. Do not
duplicate an interface cost.
ospf: duplicate ospf interface parameter -
"nonbroadcast"
Interface type is duplicated in OSPF area definition. Do not duplicate
interface type.
ospf: duplicate virtual link In the virtual link definition of ospf, the group of a passage area and
adjacent router ID has been already defined. Specify the group of an
identical passage area and adjacent router ID so that they are not
duplicated.
ospf: error in common options -- possible
duplicate or conflicting option?
In the OSPF area definition, an interface option is duplicated. Do not
duplicate an interface option.
ospf: error resolving ’<Host Name>’: Unknown
host
The specified host name cannot be found. Specify the defined host
name.
<Host Name>: Specified host name
ospf: gateway not a host address on an
attached network: <Address>
Specified gateway is not address of host on connected network.
Specify a gateway address on specified interface address.
<Address>: Specified gateway address
ospf: hour must be between 0 and 23 Specified time (hour) is invalid. Specify a value within the range of 0
to 23.
Table 5-5 Routing Protocol Error Messages (continued)