Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-111
Ver. 07-02
To show the first free entry No.:
Parameters
Filters can be set based on information in the TCP, UDP, ICMP, IGMP packets. See
Table Table 1-56 for a list of parameters and conditions.
Description: Specifies the filter list number.
Default: Undefined (mandatory input except when used with
show
subcommand).
Range of value:
1-1024
Table 1-56 Applicable Parameters by Upper Protocol
Parameter TCP UDP ICMP IGMP Undefined
Filter list no. § § § § §
-forward | -drop u u u u u
-protocol <No.> 6 17 1 2 °
-payload_length_upper_limit <Payload Length> |
-payload_length_lower_limit <Payload Length>
°°° ° °
-tos <Value> ° ° ° ° °
-ip_pair | -ip_pair_off u u u u u
-ip_source <IP Address> [-<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length>
| /<Subnet Mask Bit Length>]
°°° ° °
-ip_destination <IP Address> [-<IP Address> | mask
<Subnet Mask> | masklen <Subnet Mask Bit Length>
| /<Subnet Mask Bit Length>]
°°° ° °
-port_pair | -port_pair_off u u
-port_source <Port No.> [-<Port No.>] ° °
-port_destination <Port No.> [-<Port No.> ° °
-pair_synchronized_off | -pair_synchronized u u
-ack_check_off | -ack_check u
-syn_check_off | -syn_check u
-icmp_type <No.> °
-icmp_code <No.> °
-igmp_type <No.> °
-branch_index <No.> ° ° ° ° °
-policy_routing <Interface Name> <IP Address> ° ° ° ° °
policy_routing-group <policy-Group-Name>- ° ° ° ° °
-replace_tos <New Tos> ° ° ° ° °
§=must be set
°=canbeset
u=can be set; default when omitted
No symbol =cannot be set
Number=set number