Filter
Top Products
Filtering/QoS Information
GR2K-GA-0014 1-5
Ver. 07-02
Figure 1-3 Control Range for QoS Discard Mode
Precautions
The inputting form for the filter flow information includes the following two forms:
the flow filter constituting definition information, and the filter-list, filter-group and
filter-interface constituting definition information. The features of each inputting
form are shown in Table 1-1.
Table 1-1 Features of Each Constituting Definition Inputting Form for Filter Flow
Information
Item
Constituting Definition Iinput Form
filter-list, filter-group,
filter-interface
flow filter
Number of entry(*1) 1024 entry/device 10000 entry/device 2000 entry/RP
Inputting form Input three commands to define one
list. Effective in defining the same
flow control in multiple number of
input/output interfaces.
Input one command to define one
list. Effective in inputting a number of
entries.
Function use, and unused unit Device unit Device unit, and input/output
interface unit
GR2000 Operations Commands, Vol. 2
- Indication unit for fshow filter-flow
Device unit and list unit Input/output interface unit, and list
unit
RM Ethernet Supported. Unsupported.
VLAN ID detection Unsupported Supported
Display of entry count used Unsupported Supported
Filtering of local packet that coincides
with the flow detection conditions of
configuration definition information
During default setting, the local
packet that coincides with the flow
detection conditions of configuration
definition information is not treated
for filtering. Whether to treat the local
packet for filtering is determined
using a parameter.
During default setting, the local
packet that coincides with the flow
detection conditions of configuration
definition information is treated for
filtering. No parameter is provided.
*1: For more details, refer to Table 1-20, “Maximum Definable Entries by Each PM Mounting Memory Size,” on
page 1-25.
Sets from qos-queue-list.
Flow Control (input)
Transmission Control
Flow Detection
Sets from qos-interface.
: Control range of this command
Interface
(LINE,DLCI, etc.)
Route Search
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring
Queue Control
Flow Control (output)
Flow Detection
Priority Determination
TOS Rewrite
Contracted Bandwidth
Monitoring